Menu
Learn From The Experts:
Installing a Condensing Gas Furnace? Things to Consider

A high-efficiency condensing gas furnace can save you money on heating during the McKinney area’s cold rainy winters and reduce your risk of carbon monoxide exposure, too. For the furnace to work efficiently and safely, though, it must be installed correctly. These furnaces have different requirements from non-condensing furnaces, so there are a few things to think about if you’re having a new condensing furnace installed.

Location

As with other furnaces, a condensing gas furnace should be installed in a central location to minimize the distances air has to travel to the rooms. This may be the basement, garage, attic or a crawl space. Keep in mind, though, that because condensing furnaces draw in outside air for combustion, they shouldn’t be placed where chemicals are used, such as the laundry area or where indoor air quality is poor. In such locations, traces of airborne chemicals can enter the furnace and corrode the components.  

Venting

A condensing furnace doesn’t require a chimney. Instead, these furnaces are vented in one of two ways:

  • Direct vent (two-pipe) vent system – This system uses one pipe to bring in outside air for combustion and another to remove exhaust gases.
  • Non-direct (single-pipe) vent system – This system uses only one pipe to remove exhaust gases.

Although the direct vent method is more common and generally preferable, the ideal system for a particular installation depends on the furnace’s location, the amount of combustion and your household’s needs, among other factors. For instance, the non-direct method may be used for a furnace in a basement with good air circulation.

Drainage

Condensing furnaces produce liquid condensation as the secondary heat exchanger reclaims heat. This condensation is primarily carbonic acid and must be drained properly to prevent it from backing up and damaging the furnace components. For good drainage, the furnace must sit level or titled slightly toward the drainage lines. The drainage lines should be installed free of kinks and should run where there’s no risk of freezing.

For expert guidance on choosing and installing your new condensing gas furnace, get in touch with us at Bill Joplin’s Air Conditioning & Heating. We proudly serve homeowners in and around McKinney, Frisco and Allen.

Testimonials
Collin County Loves Us
I was satisfied with the team that came out to change my evaporator coil! Mr Andrew and Mr. David were phenomenal. They were an effective team, providing us with their progress trying tokeep us informed. The job wasn’t easy and...
Rudy H.
Bill Joplin is The Best, have used them since ‘04 at 4 different homes. Others may be cheaper but so is their product and service. The actually put a total new system in current home less than other quotes and...
Bill B.
Joplin’s has always taken great care of us for over 20 years. Today was fantastic as our AC went out over Father’s Day weekend. They came to our rescue within two hours of our call and solved our problem in...
Jennifer S.
Had two HVAC companies look at my non working outside unit. Both said I had a leak but from different spots. Both said I needed a new unit. I then called Joplin’s and they pinpointed the leak (at a totally...
Bobby R.
Had an outage on Labor Day in 105 degree heat in North Texas. Michael from Joplin’s was there in 1 hour and got our unit working again. Analyzed the problem and noticed it was a bad capacitor, and didn’t try...
Chad G.
Bill Joplin’s installed the A/C systems when I built my house almost 30 years ago and I’ve been using them for preventative maintenance and repair ever since. When it was time to replace my worn out systems, I never considered...
Patrick M
Learn From The Experts
Latest Articles & Education

Lucas, TX

Frisco, TX

Princeton, TX

Murphy, TX

Lowry Crossing, TX

Celina, TX

Blue Ridge, TX